There are many ways to customize your gun. You can get a custom grip or have it engraved with your name. But the most & easiest way is by adding some DIY gun grip tape. The process is easy and takes less than 5 minutes!
What Is Gun Grip Tape?
Gun grip tape is a self-adhesive strip of foam often referred to simply as “grip tape”. The purpose of grip tape is to make the handle of your gun easier. Also make it more comfortable to hold, which in turn enhances accuracy.
How To Customize Your Gun Grip?
There are several different types of DIY gun grip tape that you can use to customize your grips depending on what you’re looking for. You can get it cut from rubberized (rubber grip tape) sheeting by companies. Like McNett Tactical or order pre-cut tapes directly from brands. As like as Raven Concealment Systems.
DIY Tapes For Guns
To use a best gun grip tape in your gun, you will need a few tools:
- Hairdryer or heat gun.
- A utility knife/razor blade.
- Sandpaper or File
- A Swiss Army Knife saw.
- Rubbing alcohol
- Cloth or cotton swab.
Steps of DIY Gun Grip Tape
If you want to make your own gun grip tape, follow these easy steps. So you can easily use a new type or brand of gun grip tape if you wish.
Step 1: Warm The Tape With A Hair Dryer Or Gun
Warm up one side of the grip tape with a hairdryer. Do it by holding it in your hand. That should make it less stiff and easier to work with. Don’t hold the hairdryer too close. Or you will burn the adhesive on the back! It is also important that if you are using any type of liquid adhesive, do not apply heat directly before rendering the adhesive tacky.
Step 2: Shape The Tape To Fit Your Hand
Work one side of the grip tape onto the handle of your gun using both hands. Apply pressure to make sure it is attached well. You can also use a hard surface like a table if you need extra support to push down on it as you shape it.
Step 3: Cut The Excess Tape
Once you have the shape that fits your hand well, cut off any excess tape. Are you having trouble? Use a sharp blade to score the tape first and then snap it against an edge like a table. This will give you cleaner edges than using your hands.
Step 4: Smooth Edges With Sandpaper or File
You can use sandpaper or a file to clear out any bubbles in the pro grip tape. Rubbing it along the surface (a piece of wood works nicely). Do not try to peel up one side of the grip tape to go over the bubbles as this may result in miscuts. Also, be careful not to press down too hard on it or risk creasing or tearing the tape. You can also use a swiss army knife to clear out any bubbles. Because that may appear after application with the blade or saw.
Step 5: Enjoy Your New Grips!
Congratulations, you now have your own DIY grip tape for guns! All you need now is some practice at aiming and shooting with it.
Note: Please note; the above content is for reference only and not direct instruction of applying gun grip tape.
The following Frequently Asked Questions (FAQ) guide will assist you in getting the most out of your DIY gun grip tape.
Can I use my own design for grip tape?
Of course! There are plenty of options on where to get custom designs, including websites like Etsy or eBay. For a cheaper option, you can make it yourself with craft materials and some patience! You can also match your new grips to your paint job. Especially if you really want them to stand out. Just make sure that your design is not too big. So it doesn’t interfere with the function of the weapon.
Why is Glock pistol grip illegal?
Different states have different laws for how you are allowed to hold your weapon when in use. In some states, it is illegal. Since they do not allow the handle area of weapons to be modified at all. This also goes for any other modification that may change how a weapon functions or operate, including adding grips to rifles or shotguns.
Can you put grip tape on a gun?
I understand the question and how it is confusing. But unfortunately, you cannot. You can only put talon grip tape on your own hands or other objects that will not be inserted into a gun’s handle area. Putting any material onto a weapon may cause malfunctions. As well as invalidate its warranty. As well as you can use a grip rubber band in your Glock handgun, shotgun, gunsmith & Wesson. Even you can use it in any concealed carry holster too. To make your Pistol frame & inner tube more accurate and beautiful, a rubber texture tape gun grip is the perfect solution.
Is grip tape permanent?
The grip tape will not be a permanent installation unless applied with liquid adhesives like cyanoacrylate (super glue). The adhesive will wear down or corrode over time. Especially if it comes into frequent contact with dirt, sweat, oils, and other pollutants. Depending on how heavily you play. Your grip tape may need to be replaced every few months.
Why do they put tape on gun handles?
Grip tape is used to improve the look and feel of a weapon’s handle area. It also helps you to maintain a firm grip on your weapon when in use, reducing slipping or accidents that may lead to your injury or death.
Why do criminals put duct tape on guns?
Grip tape is a strong adhesive that can be found in most hardware shops. Duct tape has been shown to have the same qualities as grip tape and for a cheaper price. So it is frequently used by criminals to modify their weapons without having to spend a lot of money on a product.
How do I put gun grip tape on?
Grip tape is usually installed by first cleaning the desired area to be covered with alcohol. Ensure there are no other liquids on the Glock handle before applying grip tape. As it may cause damage or interfere with the adhesive. If you’re struggling, score it several times with a blade first. Then snap the rest off against an edge like a table.
How do I take gun grip tape off?
Since there are various types of gun grip tape, each one has its own removal process. So that can be found in this article. Be aware that some adhesives are extremely strong. So don’t risk damaging your weapon by trying to pry it up without taking proper safety precautions.
I hope this guide has helped you get the most out of your DIY gun grip tape. Do you have any other questions or concerns?
Just feel free to leave a comment below. Thanks for reading!